Hetran Technology | What's new | Business Opportunity | Product Lines | HSC | Contact us

Bar to Bar Machines

 

Turning (Peeling) Machines for Bars and Tubes

Important Features:

  • No coolant water pit needed
  • No heavy foundation required
  • Reusable clean scrap
  • Good reliable service
  • High productivity
  • Feed speed and shaving head speed infinitely variable
  • Surface quality achievable up to Rz = 4 mm and Ra = 0.75 mm
  • Excellent vibration damping
  • Low operating cost
  • Excellent surface finish
  • Quick set-up time
  • Self centering material entry and exit guides
  • Close tolerances are maintained
  • ISO h9 (Cpk = 1.33)

Straightening/Burnishing Machines for Bars and Tubes

Important Features:

  • Precision straightening with high through-speed feeds
  • Highest straightening roll life through the use of coolants and lubricants
  • Straightening tolerance up to 0.5mm/m depending on incoming material straightness and ovality
  • Short setting times
  • High machine rigidity
  • Exchangeable guide elements
  • Angle settings are reproduced exactly
  • Optimized roll contour
  • Attainable surface roughness up to Rz = 2 mm

Press Straighteners

 

Important Features:

Bar Belt Polishing Machines

Important Features:

  • Eliminates pickling or shot blasting
  • Removes surface defects and turning marks
  • No heavy foundation required
  • Quick set-up time
  • Producing a centerless ground appearance
  • High machine rigidity
  • Tolerance up to ISO h6 attainable

Planetary Belt Polishing Machines

Important Features:

  • Eliminates pickling or shot blasting
  • Removes surface defects and turning marks
  • No heavy foundation required
  • High machine rigidity
  • Quick set-up time
  • Producing a centerless ground appearance
  • Tolerance up to ISO h6 attainable

Abrasive Cut-Off Saw

Important Features:

 

HOME

 

Size Range

  
Model
 Inches Metric
BT-1
 0.375" to 1.500"
 9.5mm to 38mm
BT-2
 0.437" to 2.000"
 11mm to 50mm
BT-3
 0.500" to 3.000" 13mm to 75mm
BT-4
 0.625" to 4.000" 16mm to 100mm
BT-5

0.750" to 5.000"

19mm to 125mm

BT-6

 1.000" to 6.000" 25mm to 150mm

BT-8

1.500" to 8.000" 38mm to 200mm
BT-10

2.000" to 10.00"

 50mm to 250mm

BT-12

 3.000" to 12.00"

75mm to 300mm
BT-16
 4.000" to 16.00" 100mm to 400mm
 

Size Range

  
Model Inches Metric
BS-100 0.250" to 1.250" 6mm to 32mm
BS-200 0.375" to 2.000" 9.5mm to 50mm
BS-300 0.500" to 3.000" 13mm to 75mm
BS-400 0.750" to 4.000"

19mm to 100mm
BS-500
0.750" to 5.000"
 19mm to 125mm
BS-600 1.000" to 6.000" 25mm to 150mm

Model

Description
HP-250 250 ton capacity 10" (250mm) stroke
HP-500 500 ton capacity 15" (380mm) stroke
HP-750 750 ton capacity 20" (500mm) stroke
HP-1000 1000 ton capacity 24" (600mm) stroke
HP-1200

1200 ton capacity 26" (660mm) stroke

 

Size Range

 

Model

Inches

Metric

BBP-1 0 .250" to 1.250" 6mm to 32mm
BBP-2 0 .500" to 2.000" 13mm to 50mm
BBP-4 0 .750" to 4.000" 19mm to 100mm
BBP-6 1.000" to 6.000" 25mm to 150mm
BBP-10 3.000" to 10.000"

75mm to 250mm
BBP-16
 4.000" to 16.000" 100mm to 400mm
 

Size Range

 
Model Inches Metric
BP-1 0.250" to 1.000" 6mm to 25mm
BP-2 0.375" to 2.000" 9.5mm to 50mm
BP-3 0.625" to 3.000" 16mm to 75mm
BP-4 0.750" to 4.000" 19mm to 100mm
BP-5 1.000" to 6.000" 25mm to 150mm
BP-6 1.500" to 8.000" 38mm to 200mm
Model
Size Range
  
ACO-16 (50 HP) Inches Metric
16" Dia. Wheel 0.375" to 2.000" 9.5mm to 50mm
ACO-20 (100 HP)    
20" Dia. Wheel 0 .500" to 3.000" 13mm to 75mm
ACO-26(125 HP)    
26" Dia. Wheel 1.000" to 6.000" 25mm to 150mm
ACO-40 (200 HP)    
40" Dia. Wheel 2.000" to 8.000" 50mm to 200mm
ACO-54 (350 HP)    
54" Dia. Wheel 4.000" to 16.000" 100mm to 400mm